1·This tool is used for shaping wood.
这个工具是用来加工木料的。
—— 《牛津词典》
2·What is this tool for?
这个工具是干什么用的？
—— 《牛津词典》
3·This tool can be used in a variety of ways.
这一工具有多种用途。
—— 《牛津词典》
4·Even in small companies, computers are an essential tool.
即使在小公司里，计算机也是必不可少的工具。
—— 《牛津词典》
5·I find the best tool for the purpose is a pair of shears.
我发现达到这一目的的最好工具是一把大剪刀。
—— 《柯林斯英汉双解大词典》
1·It will save considerable machining time to use more than one tool in one machine to perform several machine operations either in sequence or simultaneously.
在一台机器上使用数种刀具来顺次或同时进行几项机器操作，将节省大量加工时间。
—— 《新英汉大辞典》
2·The sum of the control quickness, drive tuning and efficient handling of the tool path is said to yield fast and accurate program execution even when working with complicated shapes.
数控系统的快速性、驱动优化和刀具轨迹的充分处理会获得快速精确的程序执行效果，可用于复杂形状加工。
3·This causes inefficient use of the spindle, which increases benchwork finishing time in addition to the number of trips to the tool crib to replace worn, overloaded tooling.
这会导致主轴利用率低，增加精加工时间，使刀具过载。
4·Tool condition monitoring is the key technique in automatic and unmanned machining process.
刀具状态监测是实现自动化加工和无人化加工的关键技术。
5·The types and mechanisms of tool failure have been previously described.
之前，我们已经描述过刀具失效的类型和原理了。
1·This tool has complete normative appurtenances and especially appurtenances for consumer's choices.
本机床有较齐全的标准附件和特殊附件供用户选择。
2·Then, the geometrical model is changed to the mathematical model, and the relationship among the parameters of the chamfering shape and the tool adjustment is analyzed quantitatively.
对于平面倒角首先建立了加工过程的几何模型，然后推导出数学模型，建立了倒角形状参数与机床调整参数之间的联系。
3·The differential error model was used to develop the machine tool stiffness matrix. The solution gave contour plots of the position stiffness and the rotation stiffness.
根据微分误差模型，建立了机床刚度矩阵，得出了机床位置刚度和转动刚度的分布情况，着重讨论了铰链刚度对机床刚度的影响。
4·The machine tool works in safety condition by using the measuring system.
采用该系统可避免机床零件的损坏，保证机床安全可靠地运行。
5·The machine tool spindle radial motion error is measured online under the condition of workpiece being manufactured.
在机床加工工件时，实时测量机床主轴的径向运动误差。