1·Jack Cutter, an 80-year-old from Colorado and former engineer, said he had been forced back to work and taken a job as a meat clerk in a local grocery store.
杰克·卡特，一位来自科罗拉多的80岁老人，之前是一位工程师。他说自己被迫重新去工作，在当地的一家杂货店里当了一个肉食柜台的柜员。
2·Cutter denied the allegation, claiming that the unheated product posed "no severe hazard" and was in fact the "same fine product we have supplied for years."
卡特公司否定了这项指控，声称没有加热的产品“不会引起严重风险”，并声称实际上，这种好的产品我们已经供应了好多年了。
3·On February 29, 1984, Cutter became the last of the four major blood product companies to get US approval to sell heated concentrate.
1984年2月29日，卡特成为美国四个主要血液制品公司中的最后一个获得美国授权，可以卖加热浓缩物的公司。
4·Cutter: I was lying. He said it was agony.
卡特：我说谎的。他说那很痛苦。
5·Cutter: : Then stay off the stage. You're a magician, not a wizard. You got to get your hands dirty if you're going to achieve the trick impossible.
卡特：那就离开舞台。你是个魔术师，不是魔法师。你想变出不可能的魔术就得弄脏自己的手。
1·In addition, the car cut as auxiliary cutting tools and nc cutter, dedicated to supporting the use of processing welding grooves.
此外，小车切割作为辅助切割工具与数控切割机配套使用，专门用来加工焊接坡口。
2·Kelp cutter is novel in construction and practical. It replaces hand cutting by machine cutting. This cutter lightens intensity of Labour and raises Labour productivity.
简述了一种结构新颖、实用性强的海带丝切割机，该机通过机械切割代替手动切割，减轻了劳动强度，提高了生产效率。
3·Because textile printing is becoming less and less rectangular, requiring more capability than can be had from just a driven wheel knife cutter.
因为织物喷印的矩形越来越少，与驱动轮刀切割机相比，要求有更高的性能。
4·In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
5·To cut the material, owners should look into a projection laser cutter.
负责人可以考虑引进投影激光切割机来切割材料。
1·Later in the process, this software allows for fine-tuning of the "cutter path" that will be used to actually cut the steel die used in the production presses.
后来在这个过程中，该软件允许精细的“刀具路径”，将用于实际削减钢铁生产压力机用于模具调整。
2·The result shows there are great influences of geometrical properties of cutter path on the kinematics and dynamics of a machine tool.
分析结果表明刀具路径几何特性对机床的运动学和动力学特性有很大的影响。
3·A relation model between cutting forces and cutting speed is established for high speed milling condition on the basis of research into the theory of shear distortion and the discrete milling cutter.
本文首先从切削剪切变形和刀具离散化理论出发，推导出高速铣削条件下铣削力和切削速度的关系模型。
4·The method can accurately compensates cutter path and it has been successfully applied to automatic programming system for NC-mill.
该方法能准确地进行刀具轨迹补偿，运行可靠，已成功运用于数控铣削加工的自动编程系统。
5·The cutter curve is fitted with the least square method and corrected to assure the corrected generation surface is identical with that of original fitted curve.
用最小二乘法求出了刀具拟合直线，并对拟合直线进行了修正，保证了修正后的创成表面与原拟合直线创成表面相吻合。