1·Outboard motors are typically mounted on sailboats via separate bracket, not clamped on the transom as on most powerboats.
舷外发动机通常通过单独的支撑臂安装在帆船上，而不是像大多数汽艇那样用夹钳固定在横梁上。
2·In many small boats, weight too far aft can cause drag by submerging the transom, especially in light to moderate winds.
在许多小船，重量太远船尾可造成阻力淹没的横梁，特别是在轻，中度风。
3·The transom openings produced by the structural conditions allow to bring in soft indirect light throughout the daytime, providing openness to the interior space.
结构上的横梁开口允许在白天带来柔和的间接照明，为室内空间提供开阔的感觉。
4·Start by taping the transom with painters tape so you can mark your hardware locations as you go.
开始录制的横梁与画家磁带，因此您可以标记您的硬件地点你去。
5·There is already a hole in the center of the bracket, so you only need to drill the transom .
已经有一个洞的中心支架，所以你只需要演练的横梁。