1·For the light to be trapped in two dimensions, the object's surface needed to be smooth enough to cleanly reflect most of the light into the oil layer rather than scattering it at all angles.
要把光被捕获在两维的曲线状表面上时，要求物体表面非常平滑，才足以把大部分光线干净利落地反射进油层而不是分散在所有的各个角度上。
2·Light sent into the oil layer was confined there, bouncing between the metal and air boundaries. The beam spread out ever more quickly, generating a trumpet-shaped glow (see image).
当把光传入油层后，就被约束在那里，光线在金属和空气的边界之间不断反弹，于是产生了喇叭状的辉光(见图片)。
3·In the same condition, the lower the salinity of stratum-water and the stronger the additional conductivity influence, the easier the make of low resistance oil layer.
同等条件下，地层水矿化度愈低，附加导电作用愈强，愈容易形成低阻油层。
4·A bearing model for investigating the mechanism and form of bearing current is proposed, which simulates the bearing interior contact and oil layer breakdown.
为研究轴承电流产生机理及存在形式，建立模拟轴承内部接触和轴承油层击穿的轴承模型。
5·Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.
方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。