Thermomechanical英文翻译_Thermomechanical是什么意思_(热机械的的英文)_月亮词典

Thermomechanical

[热] 热机的

常用释义

词性释义

adj.

[热] 热机的，[热] 热机械的

例句

全部

In modelling terms, a coupled thermomechanical analysis represents a generalization of the computational mechanics of fracture and damage.

在模拟计算，耦合热分析是一个泛化的计算力学的断裂和损伤。

The difference of thermomechanical coupling effect is the cause to result in IR feature difference between rock and PMMA.

两种材料热力耦合机制不同是导致受力红外辐射特征差异的根本原因。

Thermomechanical pulp (TMP): Superior, stronger mechanical pulp produced from steam-heated wood chips.

热法磨木浆：用蒸汽热化木片造成的高级，质地较强的机械浆。

To describe the solidification in caster mold, a twodimensional fully thermomechanical coupled finite element model was established.

针对钢在板坯连铸结晶器内的凝固过程，建立二维完全热力耦合有限元分析模型。

PLASTICS. VOCABULARY APPLICABLE TO MECHANICAL AND THERMOMECHANICAL TESTS AND TO THEIR INTERPRETATION.

塑料 .机械和热机试验及其描述用词汇

The results show that thermomechanical treatment is the effective method to increase the strength and plasticity of 7A04 aluminum alloy.

结果表明：形变热处理是使 7A04 铝合金的塑性和强度同时提高的有效途径。

A thermomechanical model for oblique cutting was proposed.

提出了斜角切削热力模型。

Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method

玻璃质釉和瓷釉。通过快速试验法对热机械性能的测定

Factors Influencing Flocculation of Dissolved and Colloidal Substances in a Thermomechanical Pulp Water

滤液中溶解和胶体物絮聚的影响因素

Structure Evolution of a Nb-Microalloyed Extra-Low Carbon Steel during Simulated Thermomechanical Control Process

模拟控轧控冷过程含 Nb 超低碳钢的组织演变

Modelling of microstructural evolution of aluminium alloy during thermomechanical processing

铝合金热变形组织演化的模拟

Determination of glass transition temperature of plastics--Thermomechanical analysis

塑料玻璃化温度测定方法热机械分析法

Hot-rolled products in weldable fine grain structural steels - Delivery conditions for thermomechanical rolled steels

可焊接细品粒结构钢的热轧制品 .热轧钢的交货条件

Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

热力学分析压痕软化温度的测试方法

Study on the Process Parameters of Thermomechanical Treatment of Aluminum Alloy and Its Controlling

铝合金形变热处理工艺参数及其控制

Thermomechanical Treatment for the Automobile Steering Knuckle

汽车转向节形变热处理

Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

张力受控的热机械疲劳测试惯例

Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis

塑料线膨胀系数试验方法

Effects of thermomechanical heat treatment processing on microstructures and properties of Cu-Zn alloy by minor Cr alloying

形变热处理对用微量 Cr 合金化的 Cu-Zn 合金组织性能的影响

Optimum Design of Masson's Pine Thermomechanical Pulp Reinforced Polypropylene Composite

马尾松热磨机械浆增强聚丙烯复合材料优化设计

Test Method for Temperature Calibration of Thermomechanical Analyzers

热机械分析仪温度校准的测试方法

An Analysis of Microcantilever 's Thermomechanical Performance and Selection of Material

微悬臂梁的热机械性能分析及选材

Thermomechanical Behavior of SMA Long Fibers Reinforced Aluminum Matrix Composite

SMA 长纤维铝基复合材料的热力学性能

网络释义

热机械的

保温区(soak zone)有热机械的(thermomechanical)重要性，它允许装配的较冷部分“赶上”较热部分，达到温度的平衡或在整个板 …

热机械上

用来充填矿物的聚合物，其功能用在防止热机械上(thermomechanical)的疲劳破坏，即使是面临热膨胀系数有很大差别的情形下 …

热机械性

　　本研究建立热机械性(Thermomechanical)平面型微致动器(In-plane microactuator, TIM ) 的有限元素模型，施加电压於致动器的 …

热力学

3.7.5 光力学（Photomechanical）和热力学（Thermomechanical）机制46 3.8 光波导的耦合方法46-53 3.8.1 端面直接激励耦 …

常用短语

thermomechanical treatment

thermomechanical treatment - [化]形变热处理

更新时间：2025-05-03 03:22