1·Better insulation, high quality laminated woods, even repurposed or recycled materials — all will play an increasingly important role in home fabrication.
绝缘性更好的高品质叠层木板，甚至被改变用途的或再生材料——都将在房屋制造中发挥越来越重要的作用。
2·In this paper, the displacement and stress fields for a composite laminated circular shell under axial load are solved by. using three-dimensional anisotropic elasticity theory.
本文采用三维各向异性弹性理论直接求解纤维增强的复合材料叠层圆柱壳体在轴向载荷作用下的位移场和应力场。
3·Laminated composite has a new type structure which is used to improve the fracture toughness and flexure strength, so it is a good material for optimizing the mechanical properties.
叠层复合是一种新型的复合构型，它具有提高材料断裂韧性和抗弯强度的优异特性，对优化陶瓷的力学性能十分有效。
4·A laminated composite bar of rectangular cross section consists of a middle portion of one material as well as upper and lower identical cover plates of another material.
一矩形横截面的叠层复合材料杆，由以一种材料为中心部分，及另一种材料的上下两相同的盖板所组成。
5·RD auto pinning machine is used to make reference positioning pin prior to drill the laminated plates of etched circuit ca rd on drill machine for etched circuit ca rd manufacture premium products.
rd 全自动钉销机用于印刷电路叠层板在印制电路板数控钻床钻孔前钻作基准定位销钉，从面保证印刷电路板数控钻床能加工出高品质的产品。
1·The laminated, chemically resistant, self-adhesive code strip is manufactured from silicone-free polyester film and stored on reels in lengths of up to 100 meters.
经过层压，抗化学腐蚀的不干胶码带是由有机硅无聚酯薄膜制造而成，以长达100米的卷轴方式存放。
2·Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: definitions, designations and general requirements.
绝缘材料。电工用热固性树脂基工业刚性圆形层压管和棒。第1部分：定义、名称与符号和一般要求。
3·A composite interlayer suitable for using laminated glass includes a layer of plasticized polyvinyl butyral sandwiched between second and third polymeric layers.
适合用于层压玻璃的复合中间层包括夹在第二和第三聚合物层之间的增塑聚乙烯醇缩丁醛层。
4·The first and second capacitors each have a multi-layer laminated structure which includes a lower electrode, a capacitor dielectric layer and an upper electrode.
第一电容器，形成于所述半导体衬底上方并且具有包括第一下部电极、第一电容器介电层和第一上部电极的层压结构；
1·Experimental results show that the material remove rate(MRR) increases with the increase of laminated depth and decreases with the increase of tool path overlap ratio.
研究结果表明工件的加工速度随着分层厚度的增加而增加，随着轨迹重叠率的增加而减小；
2·The results show that it is feasible to apply the method of laminated pouring and accumulated liquid forging into forming components with large ratio of altitude and diameter.
研究结果表明：采用分层浇注-累积液锻成形大高径比制件的方法是完全可行的；
3·Laminated imaging of the subsurface structures of materials has been successfully realized by this technique because thermal waves are heavily damped and have short wavelengths.
由于热波是一种高衰减波，且波长短，现已成功地实现了对材料亚表面结构的分层成像。