Formability英文翻译_Formability是什么意思_(可成形性的英文)_月亮词典

Formability

成形性

常用释义

词性释义

n.

成形性，成型性能；[材] 可成形性

例句

全部

Every group evenly mixed and able to replace elm wood powder, so it has better formability and smoother surface.

各组分之间均匀粘合在一起，取代粘木粉，具有良好的成型性能和表面光洁；

De formability of the composites was maintained and the heat-durability was improved.

并使该复合材料在保持加工性能的同时耐热性能也得到提高。

The formability can be increased by altering the forming strain path in the dangerous position and adjusting the lurking fracture site.

改变危险点的应变路径，调节失效破裂的位置，可有效地提高拼焊板方盒件的冲压成形性。

One of the major methods improving the formability of HSS is the variable blank-holder force.

变压边力是改善其成形性能的有效途径。

It shows that the formability of steel sheet for home electrical appliances made by Shougang is quite well.

结果表明，该家电板具有良好的力学性能和成形性能。

The formability would be influenced with the reduction of the cooling rate.

但随着冷却速度下降，易产生流淌，影响成形性。

The numerical simulation results indicate that the variable blank-holder force can improve the formability of box deep drawing process.

研究表明，采用变压边力控制技术可以显著改善矩形盒的成形性能。

The electrode formability, uniformity of plate were investigated, the electric performance was analyzed by experimental cell.

考察了极板的成形性、均匀性，并采用实验电池进行电性能分析。

It has been experimentally indicated that moderate wrinkling will make a contribution to enhancing the formability of tube hydroforming.

实验结果表明，适度的起皱有助于提高薄壁管内高压成形的成形极限。

The formability of aluminum alloy at room temperature is very low, which can be improved significantly by high velocity forming process.

铝合金板材室温下的成形性较差，但在高速变形条件下成形极限大幅提高。

To achieve the formability properties for direct forming, soluble nitrogen is fixed as AlN by coiling the strip at higher temperatures.

为获得用于直接成型的成型性能，在高温下将钢条盘成螺旋形，填充可溶性氮作为氮化铝。

When the thickness of tube increase, the formability of the tube is better too, but the internal pressure for tube hydroforming is higher.

随着管材厚度的增加，管材的成形性能也会越好，但所需的成形压力也越高。

The varieties of the tensile formability of sheet metal has been compared and studied via standard uniaxial tensile test.

通过标准单向拉伸试验，对比研究了板材减薄前后单向拉伸性能的变化。

Heating device for rollers was installed by the reason of Mg alloys had low formability at room temperature.

针对镁合金室温塑性成形性差的原因，在设备上安装了轧辊加热装置。

Therefore, the final sheets with low temperature finish rolling displayed an enhanced formability.

因此，低温精轧能够显著提高冷轧退火板的成形性能。

When work-hardening exponent of tube material get bigger, the formability of the tube is better.

管坯材料的加工硬化指数越大，材料的成形性能越好。

value is an important index to the formability of deep-drawing sheet steel.

值是评价深冲钢板成型性能的重要指标之一。

Select blank reasonably can mainly improve sheet formability, make full use of original material and reduce the amount of subsequent work.

合理地选择冲压件的毛料外形，可以提高板料的可成性，同时也可以提高材料利用率。

The measures for eliminating weld porosity and improving the bead formability are given.

提出铝合金电子束穿透焊中出现的气孔和焊缝成形不良等问题的防止措施。

Secondly, the friction factor has great influence on panel's stamping formability.

摩擦系数对覆盖件成形性能有重要影响。

网络释义

可成形性

材料力学常用英语词汇 ... 塑性力学 Plasticity 可成形性 Formability 金属成形 Metal forming ...

成型

B——宝钢（BAOSTEEL）缩写；U——超级（Ultra）；F——成型（Formability）；D——冲压（Drawing）4）非时效性超深 …

成型性

可锻造性(Forgeability)或可成型性(Formability)或可加工性(Workability)之意思即指材料发生变形而不破坏的能力,因此延展性大 …

成形性能

纸业专业英语词汇翻译(F3) ... form 形状；成形 formability 成形性能 formain 甲醛 ...

成型性能

机械词汇的英语翻译(A-G) ... form turning 成形车削 formability 成型性能 formation 生成 ...

成形力

矫正牵引临床调整-您的广州牙医-搜狐博客... ... Resilience( 弹力,回弹): Formability( 成形力): Stiffness( 坚硬度): ...

易成形性

同济大学结构专业专业英语 -... ... fine aggregate,coarse aggregate 细骨料，粗骨料 workability,formability 和易性，易成形性 ...

同义词

n.

[材]成形性，成型性能；可成形性

compactibility

更新时间：2025-05-02 08:41