1·These larger ions take up more room and are pressed together when the glass cools, producing a layer of compressive stress on the surface of the glass.
这些钾离子占据更大的空间，当玻璃冷却下来的时候，钾离子便挤压在一起，从而在玻璃表面生产一层压应力层。
2·An applied tensile or compressive stress resolved into a shear component along a specific plane and direction within that plane.
一个实际拉或压应力沿某一特定平面和在该平面特定方向上分解得到的切应力分量。
3·A reciprocating screw injection molding machine combines the functions of an extruder and a compressive molding press.
往复螺旋注射成型机把压出机和成型压力机的功能结合起来。
4·Checking the axial compressive stress of the skirt, deduces that it is stable.
对裙座所受轴向压应力进行校核，可知裙座满足稳定性条件。
5·The films have advantages of slightly compressive stress, very low pin-hole density and superior step coverage.
这种薄膜具有很小的压应力，很低的针孔密度，良好的台阶覆盖性等优点。
1·The air outside the ball was ignored, and it was assumed that the air inside the ball behaved according to a compressive, viscous fluid-flow model.
分析假设球内空气的行为符合压缩、粘性流体流动模型。
2·AIM: To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.
目的：比较整体固化与分层固化光固化复合树脂的压缩强度、拉伸强度及弯曲强度。
3·Compressive Creep is the gradual loss of thickness that may occur if a cushioning material is.
如果减震材料长时间在高度压力下会发生厚度逐渐减少的现象，这叫压缩变形。
4·The compressive strength was increased by the addition of Na or K salt.
当液剂中添加钾或钠盐时，可使固化体的压缩强度增强；
5·As samples, the distributions of ice sheet design thickness, compressive strength, flexural strength, shear strength and elastic modulus for ice periods of 25, 50 and 100 years are presented.
作为实例，给出渤海25、50、100年重现期的平整冰层设计厚度分布、压缩强度分布、弯曲强度分布、剪切强度分布和弹性模量分布。
1·The opposite of elongation is upsetting, which produces compressive shortening. For example, the diameter of a bar can be increased by heating and hammering axially.
与伸长相反的是镦粗，即产生压缩性缩短。例如，棒料的直径可以通过加热和轴向锤击而增大。
2·The high compressive property of MSW makes the influence of the initial void ratio insignificant.
由于MSW的高压缩性，初始孔隙比不同对试样的动力特性影响不大。
3·Objective To analyse characteristics of compressive fracture of spine with osteoporosis.
目的分析骨质疏松脊椎压缩性骨折的特点。
4·In addition to these, the influence of area ratio, negative overlap, compressive factor and load inertia on system behavior are also analysed.
此外还对面积比、负重叠量、压缩性因数、负载惯量等对系统的影响进行了分析。
5·In addition to these, the influence of area ratio, negative overlap, compressive factor and load inertia on system behaviors are also analysed.
此外还对面积比、负重叠量、压缩性因数、负载惯量等对系统的影响作了分析。