Aluminum Alloys英文翻译_Aluminum Alloys是什么意思_(铝合金的英文)_月亮词典

Aluminum Alloys

铝合金：由铝和其他合金元素组成的材料

常用释义

词性释义

铝合金：由铝和其他合金元素组成的材料，具有轻、耐腐蚀等特性。

例句

全部

The machinability of a new type material used for the roll-sleeve in the transnormal roll casting of aluminum alloys was researched.

对新型铸轧辊套材料的切削加工性能进行了综合分析；

These alloys are commonly available in the form of sheet, plate and strip, and are the most common structural aluminum alloys.

它们通常用于制作片，板和条，是最常用的结构铝合金。

First, when designing a structure of any kind, don't scroll through the nearest list of aluminum alloys and pick the strongest.

第一，在设计任何结构时，不需要翻遍所有铝合金清单，然后选择强度最大的。

The fading behaviors of the structure refinement effect of electrolytic low-titanium aluminum alloys containing boron were investigated.

对比研究了硼对电解低钛铝合金组织细化效果衰退行为的影响。

Not all aluminum alloys are weldable. In general, the least weldable alloys are also the strongest alloys.

不是所有合金都是可焊的。通常，最难焊接的合金，其强度也最大。

Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.

铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金。

However, the current development and application of aluminum and aluminum alloys are restricted by its processing and low melting point.

但由于加工成形困难和自身熔点低等问题，硬铝合金的连接受到限制。

Corrosion resistance , wide range of usage . Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.

良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用。

Aluminum alloys can be divided into two classes: heat-treatable and non-heat treatable alloys.

铝合金可分为二类：可热处置惩罚铝合金和不可热处置惩罚铝合金。

For different porous aluminum alloys, the change of sound absorbent coefficient with sound frequency is basically same.

减小孔隙尺寸和增加孔隙率，多孔铝合金的吸声系数增大。

Low cycle fatigue properties of cast aluminum alloys 356 under multi-axial non proportional loading have been investigated in this paper.

主要研究了 356 铸造铝合金在多轴非比例载荷下的低周疲劳性能。

The packaging has a small tea caddies of aluminum alloys, as well as the outside.

印的包装既有铝合金的小茶叶罐，也有外面的礼盒。

Therefore, the rare-earth elements in surface treatments of aluminum alloys have broad application prospects.

因此，稀土应用于铝合金表面处理具有良好的发展前景。

On current market processing aluminum alloys, customer be used to soluble oil type cutting fluid.

目前市场上加工铝及合金，普遍采用含油乳化型切削液。

Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.

铝合金的热裂最初是由于合金和焊缝的化学作用。

Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.

铝锰，强度高，耐蚀。铝合金焊接用。

The silicon oxide films on aluminum alloys matrix were prepared by chemical vapor deposition (CVD) in ambient pressure.

采用常压 CVD 方法在铝合金基底上制备出硅氧化合物陶瓷膜层。

They are the least crack-sensitive of all the aluminum alloys.

其裂纹敏感度在所有铝合金中最小。

Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques.

第二，也是最重要的一点，很多高强度铝合金不可使用惯用的技术焊接。

Corrosion resistance and high strength . Argon arc welding of aluminum alloys .

塑性好、耐蚀。纯铝气焊、氩弧焊用。

Corrosion resistance high strength. Argon arc welding of aluminum alloys.

耐蚀，强度高。铝合金氩弧焊用。

Corrosion resistance and high strengthwide, wide range of usage. Argon arc welding of aluminum alloys.

特性和用途：耐蚀、强度高，通用性大。铝合金氩弧焊用。

TiC particles were synthesized in several aluminum alloys by in situ reaction in melt.

利用原位合成的方法在几种锻铝基体中合成了 TiC 颗粒。

The aluminum alloys containing 9% Sn has the best wear-friction properties at room temperature.

常温下含锡量在 9%时，合金具有优良的减摩耐磨的综合性能。

The aluminum alloys with 9% Sn content has the best wear-friction properties at room temperature.

常温下含锡量在 9%时，合金具有优良的耐磨减摩的综合性能。

Making 6063 alloys with electrolytic low-titanium aluminum alloys is feasible.

用电解低钛铝合金熔配 6063 合金是完全可行的。

When formed with copper, aluminum alloys are quite strong.

铝与铜形成合金，就变得十分坚硬。

网络释义

铝合金

民航英语词汇 ... BUNGEE CORD 弹簧索（减震支柱） ALUMINUM ALLOYS 铝合金 SHOCK ABSORBER 减震器、缓冲器 ...

铝铂合金

SPEX推出RoHS 各种不同机基质的X射线荧光... ... Solder Alloys( 锡合金） Aluminum Alloys( 铝铂合金） Copper Alloys( 铜合 …

同义词

铝合金

a-alloy aluminium alloys

更新时间：2025-05-03 19:59