1·Design and application of automatic burning system with automatic protection function for safety production of chemicals alumina are introduced.
介绍了一种为满足化学品氧化铝安全生产而设计的具有自动防护功能的全自动燃烧控制系统及其应用。
2·Results show that the modified cement with good durability, small expansion and low alkality can be made by use of gypsum and zeolite modifying alumina cement.
结果表明：以石膏和沸石对高铝水泥改性，可配制出耐久性良好、具有微膨胀性的低碱度改性水泥。
3·Based on the specifications of a certain inertial element, the preparation craft and surface modification of high purity alumina ceramic were presented in detail.
本文结合某惯性元件的技术要求，讨论了高纯氧化铝陶瓷的性能、制备工艺和表面改性技术。
4·The parameters of porous Alumina membrane, such as aperture, hole density and aspect ratio, membrane thickness, had been effected by many factors mentioned above.
多孔铝膜的膜参数(孔径、孔密度、孔的纵横比和膜厚)和孔排布的规律性受到诸多因素的影响和制约。
5·The preparation of aluminium nitride powder by means of direct nitridation under pressurized nitrogen atmosphere and carbothermal nitridation of alumina is studied.
对在加压氮气中金属铝粉的直接氮化和氧化铝粉的碳热还原氮化法制备氮化铝粉末进行了研究。
6·The key technology of alumina production in bayer method is on line composition detection especially on line composition analysis of aluminous ore and mother liquor.
拜尔法生产氧化铝的关键技术是生产过程的在线成分检测，特别是铝矿石和母液成分的在线分析。
7·The effect of viscosity and dipping time on membrane, and that of calcining temperature and time on the structural properties of alumina membrane are also discussed.
还研究了膜厚与浸渍时间和粘度等的关系以及对比不同焙烧温度和时间对氧化铝膜的结构影响。
8·Featured with diaspore, high alumina, high silicon and low iron, the bauxite in Shanxi have to be digested under higher temperature and denser soda in Bayer process.
山西铝土矿呈一水硬铝石型，高铝、高硅、低铁的特点，拜耳法生产氧化铝工艺须在高温，高碱的条件下溶出。
9·In this paper, the solidifying structure of alumina short fiber reinforced aluminum-silicon alloy composite is studied on the basis of domestic alumina short fibers.
本文在国产氧化铝短纤维基础上，研究了氧化铝短纤维增强铝硅合金复合材料的凝固组织。
10·According to the production characters of alumina, the architecture and function of MES of alumina production process are analyzed, and function modules are designed.
针对氧化铝生产过程的特点，分析和探讨了氧化铝生产过程MES体系结构和功能，提出了氧化铝生产过程MES的功能模块设计。
1·From inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.
复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。
2·Based on the specifications of a certain inertial element, the preparation craft and surface modification of high purity alumina ceramic were presented in detail.
本文结合某惯性元件的技术要求，讨论了高纯氧化铝陶瓷的性能、制备工艺和表面改性技术。
3·The principle and applications of advanced rotary kiln axial dynamic measuring instruments domestic are introduced and the dynamic measuring technology of alumina rotary kiln in our company.
简要介绍了国内目前比较先进的回转窑轴线动态测量仪的原理和应用，以及我公司氧化铝回转窑的动态测量技术。
4·The experiment of burying TX1 type high effective oil absorbent in the desulfurizing agent is described and the oil absorbing effect is compared with that of coke and alumina ball.
介绍了TX1型高效吸油剂在脱硫剂中的埋包实验情况，并与工业焦炭和催化剂载体（ 氧化铝球）的吸油效果进行了比较。
5·Based on the tests, the paper discusses the problems such as proportioning, sintering, digestion and settling in alumina production with Series process and puts forward the solutions for them.
结合实验探讨串联法生产氧化铝的配料、烧结、溶出、沉降等各工序的工艺技术指标，并针对出现的问题提出了解决途径。